![background image](http://html.mh-extra.com/html/xantrex/gt100-series/gt100-series_planning-and-installation-manual_881402056.webp)
Installation
3–6
153379
This manual for use by qualified installers only
Removing the Rainhood
For indoor installations, the GT100 enclosure has provisions for an exhaust air
duct to be attached, by means of a 355 × 200 mm (14 × 8 in) opening at the top of
the enclosure. The GT100 enclosure rainhood must be removed in order to access
the exhaust opening.
To remove the GT100 Rainhood:
1. Remove the 8 mm nuts (8 total) that attach the rainhood to the top of the
GT100 enclosure.
2. Carefully remove the rainhood.
Figure 3-5
Removing the Rainhood
8 mm nuts (8 total)
355 × 200 mm (14 × 8 in)
opening
Summary of Contents for GT100 Series
