![background image](http://html.mh-extra.com/html/xantrex/gt100-series/gt100-series_planning-and-installation-manual_881402053.webp)
Unloading
153379
3–3
This manual for use by qualified installers only
Removing the Pallet and Moving the GT100
Use Figure 3-1 to locate the balance point or center of gravity (
symbol).
Moving with a Forklift
To move the GT100 using a forklift:
1. Place the forks of the forklift below the unit at the points specified in
Figure 3-2 on page 3–4.
2. Lift the GT100 from beneath.
Be sure to use a forklift with a 66 cm fork span.
3. Remove the shipping pallet from beneath the unit.
4. Once the shipping pallet is removed from the unit, use the same lifting
locations to lift the unit into the place where it may be permanently located.
c
CAUTION: Equipment Damage
To move the GT100, use a forklift that has a sufficient lift capacity and a 66 cm fork span.
Figure 3-1
Center of Gravity
Center of Gravity
Side view
Front view
850mm (33.5")
609mm (24")
355mm (14")
Summary of Contents for GT100 Series
