![background image](http://html.mh-extra.com/html/xantrex/gt-2-5-de-gt-3-8-de-gt-2-8-s/gt-2-5-de-gt-3-8-de-gt-2-8-s_owners-manual_881401034.webp)
Installation
2–12
975-0253-01-01
Clearance Requirements
For optimal and safe operation, ensure there is adequate clearance around the
inverter. The minimum clearance recommendations in Table 2-3 assume a vertical
mounting. If clearances are less than these recommendations are used, additional
power reduction may occur at high ambient temperatures.
Figure 2-5
Mounting Bracket and GT Inverter
238 mm
183 mm
Mounting slots for securing the inverter
Mounting flanges
Rectangular slots × 8:
8 mm × 30 mm
Table 2-3
Inverter Clearance Requirements
Location
Minimum Clearance
Above
30 cm
Below:
• Inverter
• Bracket
Outdoors:
• 100 cm
• 130 cm
Indoors: the same clearances are recommended but not required.
In front
Sufficient room to allow for easy access to read the display and to prevent
accidental contact with hot surface.
On sides
Units can be mounted side by side with no clearance between them, but
15 cm of clearance around the outermost two units is recommended. In hot
climates, some clearance between units may be needed to prevent thermal
derating.
www.xantrex.com.ua
Summary of Contents for GT 2.5-DE, GT 3.8-DE, GT 2.8-S
