Xantrex Freedom XC 2000, Owner'S Manual

Page: 75 / 104

Operating in Battery Mode
975-0821-01-01 61
Checking Battery Status
During inverter operation (in battery mode), you can check the
battery status by observing the battery capacity indicator on the
LCD screen. The battery voltage appears in the left side of LCD
screen.
The normal operating battery voltage range is between 11 and
15 V
Z
.
Checking Output Power
When the inverter/charger is in operation (in battery mode), you
can check how much power (displayed in kW) the Freedom XC is
supplying to the connected loads by observing the load capacity
indicator on the LCD screen. The battery discharge amperage
appears in the right side of the LCD screen.
Operating Several Loads at Once
If you are going to operate several loads from the Freedom XC,
turn them on one at a time after you have turned the
inverter/charger on.
Turning loads on separately helps to ensure that the
inverter/charger does not have to deliver the starting current for all
the loads at once.
Turning the Audible Alarm ON or OFF
The Freedom XC’s audible alarm can be muted. See Adjusting
Feature Settings in Configuration Mode on page 55 .
Any warnings such as error or fault conditions or imminent
shutdown are both displayed on the LCD screen and sounded on
the alarm speakers. See
To manually reset the alarm: on page 61 .
Audible alarm for warning: The unit beeps once when a warning
condition is detected.
Audible alarm for error: The unit beeps once every 5 s for 1 min.
To mute the alarm:
n
Press any one of the three function buttons.
The alarm is automatically muted after 1 min. But the error code
continues to be displayed until the error is cleared.
To manually reset the alarm:
1. Press the Power button to turn it Off (from a down position to
up) and press again to turn it On to reset an active alarm and
clear the error.
2. If the Inverter Ignition Control is set to auto-on, toggle the
ignition signal to clear the alarm and error.
3. Toggle the AC input power to force the transition between
grid mode and battery mode. This action clears the alarm
and error.