Adjusting Display, Alarm, and Charging Current Settings
975-0395-01-01
2–3
This guide for use by qualified installers only
Adjusting Display, Alarm, and Charging Current
Settings
The two display panel buttons can be used to adjust the following:
•
What is being displayed on the screen,
•
To disable or enable the audible alarm, and
•
To change the charging current.
To adjust what is being displayed on the screen:
By default the screen displays the Input Voltage value in Volts and the
Input Voltage LED is illuminated.
1. Press the Select button once.
The display will show the
DC Input Current
and the DC Input
Current LED will illuminate.
The value is displayed on the screen as Amps.
2. Press the Select button once again.
The display will show the
AC Output Power
and the AC Output
Power LED will illuminate.
The value is displayed on the screen as kWatts.
3. Press the Select button once again.
The display will show the
DC Input Voltage
and the DC Input
Voltage LED will illuminate.
The value is displayed on the screen as Volts.
Figure 2-2
Display Panel
FREEDOM
HF 1000
Input Voltage (V)
Select
STATUS
Battery
Fault
Utility
Input Current (A)
Output Power (kW)
FreedomHF_IC_02-Configuration.fm Page 3 Monday, December 24, 2007 9:48 AM
Summary of Contents for FREEDOM HF 1000
