manualshive.com logo in svg

Xantrex Fleet Power FP 3000-12, Owner'S Manual

Share
Download
Xantrex Fleet Power FP 3000-12 Owner'S Manual Download Page 2

2

SAFETY SUMMARY

Safety information for installation and
operation is contained throughout this
manual where it applies and is not included
in this summary.

Definitions:

Warning statements 

identify conditions or

practices which could result in personal injury,
loss of life, damage to equipment or other
property.

Fuse Replacement 

For continued protection

against the possibility of fire, replace the fuse
only with a fuse of the specified voltage,
current and type ratings.

Power Source 

To avoid damage, operate the

equipment only within the specified AC (line)
and DC (battery) voltages.

Servicing 

To reduce the risk of electric shock

do not open this unit. There are no user
serviceable parts inside. Refer all service to
qualified personnel.

Thank you for purchasing a Xantrex Fleet Power

TM

 3000-12

 

Inverter

/

Charger. Xantrex

Technology Inc. takes pride in manufacturing quality products specifically designed to meet
your power requirements.

The FP3000-12 provides silent, efficient and reliable AC power for a variety of appli-

cations. It features “hands-free” operation, automatic three-stage battery charging and au-
tomatic AC transfer switching. For your convenience, service is available world-wide from
qualified service centers.

If you have any questions about your Fleet Power 3000-12, please contact Xantrex

toll free at 

1-800-670-0707

.

For technical support and additional information about Xantrex products, visit our Web

site at 

www.xantrex.com

 or email us at 

[email protected]

Notice of Copyright

Xantrex Fleet Power 3000-12 Inverter/Charger

 © January 2003 Xantrex International. All rights reserved.

Fleet Power is a registered trademark of Xantrex International. Xantrex is a registered trademark of Xantrex International.

Disclaimer

UNLESS SPECIFICALLY AGREED TO IN WRITING, XANTREX TECHNOLOGY INC. (“XANTREX”)

(a)

MAKES NO WARRANTY AS TO THE ACCURACY, SUFFICIENCY OR SUITABILITY OF ANY TECHNICAL OR

OTHER INFORMATION PROVIDED IN ITS MANUALS OR OTHER DOCUMENTATION.

(b)

ASSUMES NO RESPONSIBILITY OR LIABILITY FOR LOSS OR DAMAGE, WHETHER DIRECT, INDIRECT,

CONSEQUENTIAL OR INCIDENTAL, WHICH MIGHT ARISE OUT OF THE USE OF SUCH INFORMATION. THE
USE OF ANY SUCH INFORMATION WILL BE ENTIRELY AT THE USER’S RISK.

Date and Revision

 January 2003, Revision 2

     Part Number

 445-0206-01-01

Contact Information

 Web: www.xantrex.com Email: [email protected]

Phone: 1-800-670-0707 (toll free in North America) 1-604-422-2777 (direct)  Fax: 1-604-420-2145

Summary of Contents for Fleet Power FP 3000-12

















































Reviews:

No comments

Brands by name

Popular brands

Load more brands