Xantrex ALM - REV A, Manual

Page: 14 / 36

2.0 INSTALLATION
©2001 Xantrex Technology Inc.
P/N 975-0027-01-01 Rev A 09/01
10
Figure 2-4
Terminal Block Connections
RELAY 9
Connections
RELAY 10
Connections
RELAY 11
Connections
Wiring
NOTE: All wiring described in this manual must be
performed by a qualified, licensed electrician and meet
local and national codes, such as NEC.
Terminal Block Wiring
• Lift the appropriate lever for the relay contact.
• Insert the wire (stripped back 1/4 inch) into the terminal block.
• Snap the lever down to secure the wire.
Please refer to the auxiliary relay section of the inverter’s operation manual for
additional information.
NOTE: Due to the various ways the ALM can be wired,
detailed wiring instructions can not be given in this
manual. Please refer to the operation section of this
manual for wiring suggestions.
CAUTION: Do not wire the relays directly to a high-
amperage device. Connection to a high-current device
will open the fuse in the common line and possibly
damage the relay.