Figure 1 Preparing for mounting
Menu
Up / Set
Power
1
2
1
Using the mounting template at the end of this guide, mark the positions of the center
hole and the mounting holes on the wall where you plan to mount the remote panel.
2
Using a hole saw with a minimum diameter of 3" (76.2mm) and a maximum of 3.5"
(88.9mm) and with the center hole marker, cut a circular hole on the wall. Insert the
back of the remote panel through the hole.
Menu
Up / Set
Power
Menu
Up / Set
Power
3
4
3
Using the provided mounting screws, secure the remote panel on the wall.
NOTE
: For drilling on hard wood use bit size 1/16 and on soft wood use bit size 3/64
4
Attach the bezel to conceal the unit's mounting screws.
10
975-1013-01-01 Rev A
Oct 2019
Summary of Contents for 710-0010
Page 1: ...Owner s Guide Solar MPPT Remote Panel 710 0010...
Page 26: ......
Page 27: ...This page has no content...