2
RMGATE
3. Plug the 2.1 to 2.1mm Power Supply cable (supplied), into the 12 VDC jack on the GMM1A and the
POWER OUT jack on the RMGATE, as shown.
4. Peel off the supplied Icon Labels (refer to
Fig. 3
) that correspond to the controlled equipment and place
them on the appropriate recessed locations opposite the LED's on the front panel.
5. Mount the completed assembly into a 19" rack using the rack panel cup washers and screws supplied.
6. When you have finished all other connections, plug a 782-00 Power Supply into the POWER IN jack
on the RMGATE (see
Fig. 2
).
AUX 1
AUX
SAT 1
SAT 2
VCR 1
VCR 2
TUNER 1
TUNER 2
DVD 1
DVD 2
GATEKEEP-IR
SOURCE
®
Custom labels for RMGATE
DSS
AUX 1
CD 2
LD
RCVR
CAM
CD 3
LD 1
SAT
TAPE 2
TV 2
CATV
DAT
LD 2
SAT 1
TUNER
TV 3
PHONO
TUNER 2
TV 4
PROJ
TAPE
TV
VCR
CD
AMP
AUX
CD 1
DVD
DVD 2
PRE AMP
SAT 2
TAPE 1
TV 1
VCR 1
VCR 2
SRND
DVD 1
TUNER 1
Peel off the desired adhesive-backed Icon Labels and place
them on the recessed locations opposite the LED's that
correspond to the gate-controlled devices.
RMGATE
(front view)
ICON LABEL SHEET
(included)
LED's
Fig. 3
Applying the Icon Labels to the front of the RMGATE Rack Panel
2-22-01
Rev.B
