![background image](http://html1.mh-extra.com/html/xantech/rmgate/rmgate_installation-instructions_3158622001.webp)
1
Remote Control Switchers
INSTALLATION INSTRUCTIONS
RMGATE
RACK MOUNT ADAPTER FOR THE GATEKEEP-IR
™
The RMGATE provides a convenient means for mounting the GATEKEEP-IR™ GMB9 assembly into a
standard 19 inch rack. It incorporates eight STATUS LED's that indicate a components ON/OFF condition.
The black anodized panel is a standard 7.00 inch increment height and is 3/16" thick. Install the panel as
follows:
1. Mount the GMB9 to the rear of the RMGATE. Refer to
Fig. 2
below. Use the hardware that comes
with the GMB9 and the RMGATE.
2. Plug the 3.5-to-3.5mm Mono Mini Plug cables (supplied) between the STATUS jack of each gate
module to the corresponding STATUS GATE IN jack on the RMGATE as shown (
Fig. 2
). That is,
connect Gate 1 (slot #1) to GATE IN 1, Gate 2 (slot #2) to GATE IN 2, etc. Use the longer 18" cables
for the 4 gates to the left and the 12" cables for the remainder.
Fig. 1
The RMGATE, Front View
AUX 1
AUX
SAT 1
SAT 2
VCR 1
VCR 2
TUNER 1
TUNER 2
DVD 1
DVD 2
GATEKEEP-IR
SOURCE
Fig. 2
A GMB9 Gatekeep-IR™ Assembly Mounted to the Rear Surface of the RMGATE Rack Panel
12 VDC
CONFIRM
IR IN
POWER
+12V
G
IR IN
IR OUT
GMM1A
C I
CURRENT
SENSOR
THRESHOLD
ON
IR OUT
GCM1
STATUS
CONTROL
IN
ON
IR OUT
+
–
GEM1
STATUS
IN
OUT
ON
IR OUT
AUDIO
L
R
L
R
GAM1
STATUS
VIDEO IN
VIDEO OUT
ON
IR OUT
GVM1
STATUS
TEMPERATURE
SENSOR
ON
IR OUT
GTM1
THRESHOLD
STATUS
LIGHT
SENSOR
THRESHOLD
ON
IR OUT
GLM1
STATUS
STATUS
OUT
IN
POWER
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
GATE
IN
GATE
OUT
GMB9
(not included)
RMGATE RACK MOUNT ADAPTER
(rear view)
Mount the GMB9 Gatekeep-IR assembly to the 4 studs on the rear of the
RMGATE using hardware included with the GMB9 and the RMGATE.
782-00
Power Supply
(not included)
To 120 V AC
(unswitched)
0 - 12Volt
STATUS pass-thru'
for indicators, for
control of other
equipment, etc.,
as needed.
LED and STATUS
pass-thru' assembly
(included on RMGATE)
3.5-to-3.5mm Mono
Mini Plug cables (8 included)
2.1-to-2.1mm Power
Supply cable (included).
Gate 2
(Slot #2)
Gate 3
(Slot #3)
Gate 4
(Slot #4)
Gate 5
(Slot #5)
Gate 6
(Slot #6)
Gate 1
(Slot #1)
Unused
Slots