Page 8
Model IR-X10
© 2002 Xantech Corporation.
Figure 3 – Creating X10 Modules
PLACING X10 COMMANDS ON A VIRTUAL CONTROLLER
1. Select the module in the Module Name List Box you would like to place
on the Remote Controller by clicking once on the Module Name. The
module should now be highlighted.
2. Select a command Function from the Function List (i.e., On, On/Off
Toggle, etc.) that you desire.
CAUTION
: The On/Off Toggle and All Lights On/Off Toggle commands
will only work with the newer URC-2P/B remote and the MRC44. If you
do not know
which unit you have, use the “Who Am I” function under the Base
Unit menu.
3. Click a Source button on the virtual controller (URC-2P/B shown as
example) where you want the command to be placed under (i.e. TV,
SAT, AUX etc…). A blue outline will appear around the button and the
“virtual” LED will turn red.
4. Click a button on the virtual controller where you want the command
(e.g. ‘D’). This button will now have a blue outline around it.
5. Click Place. The command will appear in the command list (e.g., A2 On
(XANTECH - IRX10).
