Model IR-X10
Page 13
© 2002 Xantech Corporation.
Figure 6 – Creating a Scene Command Macro
TRANSFERRING DATA TO A REAL CONTROLLER
When you have completed all programming of the virtual keypad and tested
all commands to see that they operate the Controlled Equipment, you are
then ready to do a Project Download that will transfer all data to a "real"
controller (URC-2P/B in this example).
Note
: Testing X10 commands on a Virtual URC can sometimes be
intermittent but when program is transferred to remote, all works fine. During
Test Mode, the URC-2 will only emit ONE code burst. In normal use through
a URC-2, the whole time a button is pressed, consecutive commands are
transmitted. To simulate this, version 2.00 software or higher, has a
REPEAT
function. Add a
REPEAT
of ‘
1
’ or ‘
2
’ just before the command. This
will not affect the button function in any way and will make the
Test
mode
more accurate.
