11
Note
:
You (or your network administra-
tor) must first assign an IP address
through the printer’s front panel
before continuing installation.
IP Address Configuration
When using the Ethernet interface and
TCP/IP protocol, use the front panel IP
address (Network:IpAddr) configuration
menu and front panel keys to set the address
as follows:
•
Reset
key increases the current
number flashing by one.
•
Menu
key moves to the next
number to the right of the current
number flashing.
Installation-Windows 98/Me (
continued)
•
Test
key moves to the next number
to the left of the current number
flashing.
•
Enter
key accept new address (if
valid) and returns to Network:
IpAddr menu. The menu will
display a message if the entered
address is invalid.
Note
:
You must turn the printer off and
restart it for the new IP address to
take effect.
Win95/98/Me LPR Tool
This allows you to communicate to your
printer through the LPR port
Note
:
For Windows 98 and Me users, you
must install this utility to set up your IP,
SubNet, and Gateway addresses.
Fig. 38 Select Software Utilities.
Fig. 39 Highlight LPR Tool. Click OK.
Fig. 40 Read Setup Window. Click Next.
Summary of Contents for FilmMaker 4
Page 1: ...100 100608 k...
