22
Installation-Windows NT/2000/XP (
continued
)
Note:
Be sure to close the Properties
window to apply the new settings.
Configuring IP, SubNet, and Gateway
Addresses
1.
From the
ps_files
folder on the XANTÉ
CD-ROM, copy
dhcpoff.ps
to your
c:\
drive.
2.
Go to
DOS (Command) Prompt
.
3.
Type
copy dhcpoff.ps to lpt1
.
4.
Power cycle the printer (turn off, then
back on).
5.
Using a word processing application,
open
setipsub.ps
file from the ps_files
folder. Edit the file so it contains the IP,
Subnet, and Gateway address you
obtained from your network administra-
tor. Save the file to your c:\ drive.
6.
Go to
DOS (Command) Prompt
.
7.
Type
copy setipsub.ps to lpt1
.
8.
Power cycle the printer again and verify
that the start-up page contains your IP,
Subnet, and Gateway addresses.
9.
Go to
DOS (Command) Prompt
to ping
the printer.
c:\ping (
IP Address
)
Note:
If you
can
ping the printer, go on to
step 10. If you
cannot
ping your
printer, contact your Network
Administrator.
10. Go to your Printer Properties (fig. 96)
and select the Port Tab (fig. 97).
Fig. 96 Printer Properties Window.
Fig. 97 Select Ports Tab.
11. Select Add Port from the Ports Tab.
12. Highlight
Standard TCP/IP Port
; then,
click New Port (fig. 98).
Summary of Contents for FilmMaker 4
Page 1: ...100 100608 k...
