XAG P100 Pro, Pilot Operating Handbook

Page: 62 / 184

XAG AUSTRALIA 62
Calibration via ARC3 Pro
+ +
Left Joystick Right Joystick Fn Button
01. Move both the left and right joysticks to the far left and at the same time long press button Fn.
You will hear a beep from the buzzer with six indicators turning solid yellow, and now the remote
controller is in calibration mode.
02. Release both joysticks and button Fn. The six indicators will remain solid yellow, and the remote
controller will check the calibration automatically.
03. Wait until all six indicators turn slow flashing yellow, and move both joysticks to the far end in
four directions (forward, backward, left and right) simultaneously.
Left Joystick Right Joystick
+
Left and Right Joysticks
Stop Button
04. Short press the Stop button, and you will hear a beep from the buzzer, with all six indicators
getting back to normal. The calibration is now completed.