XAG P100 Pro, Pilot Operating Handbook

Page: 58 / 184

XAG AUSTRALIA 58
Networking Mode
ARC3 Pro and the Aircraft needs to be added to your XAG One APP account before Networking Mode
can be conducted.
📋 PREREQUISITE
Should you encounter a lack of 4G network availability or an unstable connection, the remote
controller can be linked to the aircraft using a local network. This method allows for flexible piloting of
the aircraft without the need for an internet connection. Please follow the subsequent instructions to
establish this connection.
01. Ensure both the ARC3 Pro Remote Controller and the Aircraft are turned ON.
02. With the Aircraft ON, Press and Hold the Power Button on the Smart Battery until the Arm Light
(ESC Indicator) flashes yellow. This indicates that the aircraft is now in Networking Mode.
03. With the Remote Controller ON, wait until the Wireless communication indicator is OFF.
Then, Press and Hold the Power Button of the Remote Controller for approximately 10 seconds
until the Wireless communication indicator
begins to flash yellow. This indicates that the
Remote Controller is now in Networking Mode.
04. The Wireless communication indicator will flash green, and the remote controller will
automatically restart.
05. Please patiently wait for the Wireless communication indicator to return to Normal (Solid
Green). This indicates that the Networking process has been successful and all the status
indicators on both the Aircraft and ARC3 Pro have returned to Normal.
📖
INSTRUCTION
ℹ
IMPORTANT
ℹ Always ensure that both the ARC3 Pro Remote Controller and the Aircraft are sufficiently
charged before initiating the Networking Mode.
ℹ If the Networking Mode fails, repeat the steps above. If the issue persists, contact XAG technical
support for assistance.