background image

www.xa.com

10

Troubleshooting Guide:

Built-in Battery

Type: 18650 lithium battery 
Voltage: 24 V
Capacity: 112wh

Charger

Input: AC220V
Output: DC5-12v 
Power: 18w

Technical Specifications

Automatic Liquid Refiller

Model: ALR5
Dimensions: 405*238*315mm
Weight: 5 kg
Protection grade: IP65
Operating temperature: 0 - 80 °
Storage temperature: 5 - 60 °
Filling speed: 5L/min
Rated power: 36w
Continuous operating hours: <=4 h 
Compatibility:  2019  Automatic  Liquid 
Container (10/16L)

1.

The buzzer will beep once if the container is properly placed. Otherwise, it indicates the container 

magnet is broken or the container detection circuit on the motherboard of the refiller is faulty.

2.

If the refiller is turned on when the container is not placed, the buzzer will beep twice and the fault 

indicator will turn red.

3.

If the refiller is turned on when it is not connected to the container via Bluetooth, the buzzer will beep 

three times and the fault indicator will turn red.

4.

If the float of the container is stuck or the flow rate of the refiller is too low, the buzzer will beep four 

times, and the fault indicator will turn red.

5.

If  the  rotational  speed  of  the  refiller  is  irregular,  the  buzzer  will  beep  five  times,  and  the  fault 

indicator will turn red.

6.

 When the liquid filling is completed, the buzzer will beep six times.

7.

30 seconds after the refiller stops working, all indicators will flash eight times and the buzzer will beep 

eight times before the refiller is automatically turned off.

8.

 When the power level is too low, the operation is suspended. All indicators flash eight times and the 

buzzer  beeps  eight  times  before  refiller  turns  off  automatically.  Now,  the  refiller  needs  to  be 
charged.

Summary of Contents for ALR5













Reviews: