background image

The Automatic Power Save Feature 

 
Your M4X COMMUNICATOR has a unique circuit designed to dramatically extend battery life. If it senses no transmission  
within 5 seconds, it automatically switches to the power save mode. The COMMUNICATOR can still receive 
transmissions in this mode. 

 
The Display Backlit Display Feature 

 
Your unit’s LCD Backlight display automatically lights up for 5 seconds with the press of any key. 
 
 
 
 
 
 
 
Channels   

 

22 FRS/GMRS Channels 

Operating Frequency 

UHF 462.5500 ~ 467.7125 MHz 

Power Source 

 

3 AAA size Alkaline Batteries with Ni-MH capability (not included) 

Output Power 

 

0.083W

 ERP maximum 

Battery Life 

 

Varies per user

 

 

Channel and Frequency (MHz) Chart 

Channel 1 thru 14 transmit on FRS frequencies 
Channels 15 thru 22 transmit on GMRS frequencies 
 

Ch. 

Frequency 

Ch. 

Frequency 

 

462.5625  

12 

467.6625 

462.5875  

13 

467.6875 

462.6125  

14 

467.7125 

462.6375  

15 

462.5500 

462.6625  

16 

462.5750 

462.6875  

17 

462.6000 

462.7125  

18 

462.6250 

467.5625  

19 

462.6500 

467.5875  

20 

462.6750 

10 

467.6125  

21 

462.7000 

11 

467.6375  

22 

462.7250 

 
 
 
 
 
 
Do not use any COMMUNICATOR that has damaged Antenna. If a damaged antenna comes in contact with the skin, a 
minor burn may occur. 
 
 
 
 

 

 

 

 

 

 

 

 
 

• 

Only use battery which is indicated in the manual. Using another type of battery can substantially reduce play time  

• 

If you plan on using your COMMUNICATOR for a month or more, be sure to remove battery because they 
can leak and damage the unit. 

• 

Dispose of battery in the proper manner, according to federal, state, and local regulations that apply in your area. 

• 

Battery may leak electrolyte if mixed with a different battery type, if inserted incorrectly, if disposed in fire, or if an 
attempt is made to charge a battery not intended to be charged. 

• 

Discard leaky batteries immediately. Leaking batteries can cause skin burns or other personal injury. 

 

 
 
 
 
 
 
 
 

SPECIFICATIONS 

IMPORTANT BATTERY INFORMATION 

DAMAGED ANTENNA 

Summary of Contents for M4X












Reviews: