10
Mobile 12 V High-Pressure Cleaner HDR-G1
hose are squashed, damaged by sharp edges or
otherwise subjected to mechanical stress.
Do not fill any flammable or corrosive liquids or
solvents into the bucket. Detergents are added to
the system through the bottle on the spray gun.
Use only an input voltage of 12 V DC. A higher
voltage can destroy the pump. If the device is not
used for some time or is being serviced, disconnect
the plug from the cigarette lighter.
Do not aim the waterjet direct at people, people’s
faces or at the pump unit itself and be careful with
delicate surfaces.
The high-pressure cleaner is protected against
splash water, but it may not be used in rain nor may
it be fully immersed in water.
Never submerse the machine in water.
Do not use the device without water other than
described in the manual. Without the cooling water
the pump will run hot and become damaged.
Always store the unit in an ambient temperature
above 0°C, as freezing residue water can damage
the pump.
If you have any doubts regarding the handling
of the device or questions about security, please
contact a professional person or the manufacturer.
Contents:
•
High-pressure pump
•
6 m pressure hose
•
Foldable bucket
•
Spray gun
•
Brush accessory
•
Shower accessory
•
12 V power cable
•
Detergent flask
•
4x Replacement gaskets
•
User manual
Technical Data
•
Power input 12 V DC/5 A
•
Power 60 Watt
•
Water pressure: 3 – 9 bar max.
•
Water bucket 15 L
•
High pressure hose 6 m
•
Weight 4 kg
Getting started
fig. 1
1.
Put the pump unit with the valve pointing
upwards onto the ground. The surface should
be flat, level and stable.
2.
Connect the hose to the quick release
connector at the side of the unit. Make sure
that the connection is locked and cannot be
pulled off.
fig. 2
