X4-TECH 701740, User Manual

Page: 39 / 96

EN
39
cd playback
»
Switch the unit on by turning the VOL/ON control (see 6.17)
clockwise.
»
Open the CD door (see 6.4) by lifting the recess OPEN (see 6.3).
Place a CD on the center spindle with the cover side faced up
and close the CD door.
»
On the LCD display (see 6.1) the indication „- -„ will be shown
for a few seconds. Afterwards, the total number of tracks will
be displayed.
»
Press PLAY/PAUSE (see 6.9) to start the playback. The track
number is indicated (e.g. „01“).
»
Adjust the volume by rotating the VOL/ON control (see 6.17) to
a suitable listening level.
»
To interrupt the playback temporarily (pause), press PLAY/
PAUSE (see 6.9). Pressing PLAY/PAUSE again resumes the
playback.
»
Press STOP (see 6.12) to stop the playback of the CD.
Selection of a specific track
During the playback you can skip with (see 6.10) or (see 6.11)
to the next or previous track.
»
Select the track in the playback, stop or pause mode with
(see 6.10) or (see 6.11) and start the playback with PLAY/
PAUSE (see 6.9).
»
Pressing briefly on (see 6.10) you can skip to the next track.
Pressing this button repeatedly, you can skip several tracks
until the desired track number is shown on the display.
»
Pressing briefly on (see 6.11) you will return to the
beginning of the current track.
»
To skip back multiple tracks, press (see 6.11) repeatedly.