background image

 W

ARRANTY

 

12 MONTH LIMITED WARRANTY

X10 (USA) INC. (X10) WARRANTS ITS PRODUCTS TO
BE FREE FROM DEFECTIVE MATERIAL AND
WORKMANSHIP FOR A PERIOD OF ONE (1) YEAR
FROM THE ORIGINAL DATE OF PURCHASE AT RETAIL.
X10 AGREES TO REPAIR OR REPLACE, AT ITS SOLE
DISCRETION, A DEFECTIVE X10 PRODUCT IF
RETURNED TO X10 WITHIN THE WARRANTY PERIOD
AND WITH PROOF OF PURCHASE.

IF SERVICE IS REQUIRED UNDER THIS WARRANTY:

1.

RETURN THE DEFECTIVE UNIT POSTAGE PREPAID
TO:

X10.COM, INC.

3824 NORTH 5th St., SUITE C,

NORTH LAS VEGAS, NV 89030

2.

ENCLOSE A CHECK FOR $4.00 TO COVER
HANDLING AND RETURN POSTAGE.

3.

ENCLOSE A DATED PROOF OF PURCHASE.

4.

ENCLOSE YOUR COMPLETED WARRANTY CARD.

5.

X10 IS NOT RESPONSIBLE FOR SHIPPING
DAMAGE. UNITS TO BE RETURNED SHOULD BE
PACKED CAREFULLY.

THIS WARRANTY DOES NOT EXTEND TO ANY X10
PRODUCTS WHICH HAVE BEEN SUBJECT TO MISUSE,
NEGLECT, ACCIDENT, INCORRECT WIRING OR TO
USE IN VIOLATION OF OPERATING INSTRUCTIONS
FURNISHED BY US, NOR EXTEND TO ANY UNITS
ALTERED OR REPAIRED FOR WARRANTY DEFECT BY
ANYONE OTHER THAN X10. THIS WARRANTY DOES
NOT COVER ANY INCIDENTAL OR CONSEQUENTIAL
DAMAGES AND IS IN LIEU OF ALL OTHER
WARRANTIES EXPRESSED OR IMPLIED AND NO
REPRESENTATIVE OR PERSON IS AUTHORIZED TO
ASSUME FOR US ANY OTHER LIABILITY IN
CONNECTION WITH THE SALE OF OUR PRODUCTS.

SOME STATES DO NOT ALLOW LIMITATIONS ON
HOW LONG AN IMPLIED WARRANTY LASTS, AND/
OR THE EXCLUSION OR LIMITATION OF INCIDENTAL
OR CONSEQUENTIAL DAMAGES SO THE ABOVE
LIMITATIONS AND EXCLUSIONS MAY NOT APPLY TO
THE ORIGINAL CUSTOMER. THIS WARRANTY GIVES
YOU SPECIFIC RIGHTS AND YOU MAY ALSO HAVE
OTHER RIGHTS WHICH VARY FROM STATE TO STATE.

If the Transceiver Module works, but
other Modules don’t respond:

• Check that the Module has the same

House Code as the Transceiver
Module.

• Try plugging the Module into a

different outlet.

Note: if you use an RF Transceiver (such
as the RR501 or TM751) to control X10
Modules, you will be able to control up
to 16 Modules. When using a
Transceiver, when you press 1-6-ON you
turn on Module number 16. However, if
you use an IR543 Console, when you
press 1-6-ON you turn on Modules 1
AND 6. The IR543 can only control 10
Modules (1-9 plus 0=10).

Caution:

 Do not connect an appliance

such as a coffee pot or heater to the
Lamp Module. It may damage the
module and the appliance and could
cause a fire hazard.

Summary of Contents for VK47A
















Reviews: