PHC01_02-6/98
Tampa, FL33618
Mini Controller
™
®
4
To turn All Lights and appliances Off
Press the BOTTOM of the All Lights On/All Units Off key to instantly turn off ALL Modules
(which are set the same Housecode as the Mini Controller), including Appliance Modules.
The Finder Label is a convenient place to indicate the locations of lights and appliances
controller by your system. There is one box for each unit key.
Problem Solving
If a particular Module won’t go on or off from the buttons on the Mini Controller:
Check that you have power to the outlet controlling the Module and the switch on the light
or appliance is ON.
Check that the Unit Code on the Module is set to the correct number. Check that the
Housecode on the Module is set correctly. The Housecode on the Module and the Mini
Controller must be set to the same letter.
Try plugging the Module and the Mini Controller into the same outlet. If the Module doesn’t
work in ANY outlet, not even with the Module and the Mini Controller in the same duplex
receptacle (top and bottom) the Module may be damaged or faulty.
If you can’t control ANY Modules from the Mini Controller
Check that you have power to the outlet for the Mini Controller.
Check that the Housecode on the Mini Controller is set correctly.
Try plugging the Module and the Mini Controller into the same outlet. If NONE of your
Modules work in ANY outlet, not even with the Module and the Mini Controller in the same
duplex receptacle (top and bottom) the Mini Controller may be damaged or faulty.
INTERCOM SYSTEMS
Intercom systems which send voice signals over existing electrical wiring may interfere
with the operation of the Mini Controller when the intercom is in use. If the Intercom system
has it’s own separate wiring it will not cause a problem.
POWER INTERRUPTIONS
When the power is restored after an outage, Lamp Modules and Wall Switch Modules will
normally be OFF. Appliance Modules will stay as they were before the interruption.
MANUAL CONTROL
Lights and appliance connected to plug-in Modules can be turned ON with their own
power switch. Simply turn the switch OFF then ON again once or twice. For lamps with
three-way bulbs, you will have to rotate the power switch up to 4 times before the light
comes on.
The Wall Switch Module can be turned ON or OFF locally using it’s push button. The power
On-Off switch on the Wall Switch Module is used to completely turn off the power. For
example, when changing a light bulb.
Using the Mini Controller
