Battery Replacement
Providing the batteries have not already failed, they can be replaced with
fresh batteries without the need to reinstall the remote. After removing the
old batteries fresh batteries must be fi tted within 30 seconds to ensure that the
security code is retained.
Gently pry the 2 halves of the Keyfob remotes case apart and install two
CR2016 lithium batteries in the compartment (+ facing up). Press the 2
halves of the cabinet back together.
Once the batteries have been replaced, confi rm that the remote is still
registered in the Console by arming the system. If it does not arm, the code
has been lost and you will need to proceed as described below.
If the batteries have failed completely, the security code will have been lost.
You will need to reinstall the Keyfob remote following the directions in this
instruction sheet.
FCC Statement
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS
SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY
NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT
ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY
CAUSE UNDESIRED OPERATION.
NOTE:
NO CHANGES OR MODIFICATIONS MAY BE MADE TO THE
UNITS. ANY CHANGES MADE TO THE UNITS WILL VOID THE USER’S
AUTHORITY TO OPERATE THE EQUIPMENT.
Please visit: www.x10.com/support for additional help and warranty
conditions.
Also see www.x10.com for more accessories that work with your Security
System, including Lamp Modules and Wall Switch Modules to fl ash lights
when the alarm trips, and remote controls that let you remotely control lights
(and appliances) connected to X10 Modules.
Security Keyfob Remote
Model KR32A
The X10 Supervised Security System includes a Security Console with an automatic
dialer that calls friends or relatives in the event of a break in. Accessories include
battery powered Radio Frequency (RF) Door/Window Sensors, battery powered RF
Motion Detectors, and RF Keyfob Remote Controls for arming and disarming the
system. All sensors and remotes incorporate random digital security coding.
The system can be confi gured with any combination of the following items:
• Up to 16* Wireless Keyfob Security Remotes with arm/disarm and panic
functions, and buttons to control security lights in and around the home.
• Up to 30* magnetic switch operated Wireless Door/Window Sensors.
• Up to 30* Wireless PIR Motion Detectors.
• Optional X10 Home Automation modules such as plug-in lamp and appliance
modules and wired-in replacement wall switches can be added to the system.
The Owner’s Manual for the Security System describes the full installation process
for the Security System, and should be referred to as a supplement to this instruction
sheet.
*Note: Door/Window Sensors and Motion Detectors may be added in any
combination up to a total of 30, e.g. 15 Door/Window Sensors and 15 Motion
Detectors, or any combination up to a total of 30 . There are also 2 hard wired
inputs, which are zones 31 and 32.
X10.com, a Division of X10 Wireless Technology, Inc.
400 Forge Way, Suite 409-412, Rockaway, NJ 07866
KR32A-12/12
