IMPORTANT
The battery is located in the frame of the eBike
underneath the charging port area. Do not attempt to
disassemble the battery compartment, or try to connect
positive to negative. Please charge the eBike every 15-30
days (even if not being used) in order to keep the battery
healthy. For optimum life span, the battery should be
empty before charging.
VI. Battery and Charger Care
Battery description
Fully-charged
voltage
41.5v
Undervoltage
protection
29v
Core brand
Panasonic power core
Core quantity
30/40pcs
Charging
temperature
0~45
℃
Discharging
temperature
-20~60
℃
USING THE CHARGER
:
1. Connect charger plug to 110/240v mains power supply
socket first.
2. Connect charger to the eBike charging port, and screw
into place.
3. After the eBike is fully charged, remove the plug from the
eBike charge port and then pull the power cord from
the wall.
4. Always try to charge the battery from almost-empty, and
never let it stay uncharged for more than 1 month.
7
PRECAUTIONS
:
1. Please ONLY use the original charger to charge the X1 Explorer. If a third party charger is used it may cause
fire, battery explosion, or other dangerous hazards. It will also invalidate your warranty.
2. Input voltage and Output voltage are 110v and 42v. The charger connector has 1 positive electrode and 3
negative electrodes. Please don’t disassemble or connect negative to positive. Do not use third party batteries.
3. Red Light on charger box = Battery is currently charging. Green Light on charger box = eBike is fully charged.
4. Only charge indoors. Keep away from water. Do not leave this eBike in the sun, and during transport of the
eBike do not let it shake around too much.
5. If the charger cord is broken or damaged, please replace the charger. Do not attempt to disassemble the
charger as you may cause yourself to get an electric shock.
