Installation requirements
Pin arrangement of each terminal
Power cable
- GND Black
+ACC Yellow
+B Red
Direction indicator
connecting cable(T/C)
GPS
connecting cable
Caution
This product is designed to be embedded therefore make sure to apply power
before completing installation and check for normal saving function of the front/rear video.
GND
Turn Right Red
Turn Left Yellow
GND
TXD
VCC
Make sure the marked part
not touching any metal part of the car
with the power ON.
Warning
Check the items below before installing the product:
Make sure the surface for installation is flat and the engine is turned off.
All essential parts/components are in the box; check and follow the installation instructions.
The manual covers installation instructions for car, SUV, large van, bus and truck.
For bus or truck, the installation is similar to that for cars except for the installation location;
please refer to ‘detail installation instructions’ for each part.
Re-install the product if it doesn’t work properly by referring to the installation instructions.
Make sure to connect the rear camera with BlackBox not connected to the power cable.
Keep the windshield clean.
Tinted windows or heat rays deteriorate video quality of the rear camera.
Remove the protection plastic sheets from the front/rear camera lenses after installation.
Summary of Contents for K17
Page 1: ...User Manual K17...
