Caution
Functions
connection. (see page 8 Pin Arrangement)
Power is automatically cut off once the room temperature goes up since the high temperature protection
circuit is built in. This is not malfunctioning and when the temperature falls into normal range, it automatically
starts again.
Battery protection circuit is built in however it may be discharged if the battery is worn out or depending on
the vehicle’s condition.
The company is not responsible for worn-out batteries due to using normal power supply.
Power ON/OFF
Power is automatically applied once a car is started and the power light(red LED) is turned ON.
The main body should be connected to the cigar jack power supply(normal power supply).
Once booting is complete, input audio guide and run BlackBox.
Motion detection, parking impact detection feature
Parking surveillance feature runs automatically unless there is movement in parking mode.
Security warning light(blue LED) blinks to inform parking surveillance feature is activated.
(Page 20 Setting time for parking mode in the manual)
Parking surveillance mode is converted automatically to BlackBox mode(normal save/impact save/manual
(forced) save) once the vehicle is started again.
When motion is detected during parking surveillance, it saves 30-sec. video in ‘Motion’ folder.
When impact is detected during parking surveillance, it saves 30-sec. video in ‘Even’ folder.
When motion or parking impact is detected, security warning light(blue LED) blinks rapidly to display
a video is being saved.
In parking surveillance mode, normal save/manual(forced) save features are not available.
To use parking surveillance feature, normal power supply should be connected.
(install normal power supply cable provided with the product)
Contact stores or installation service centers near you regarding normal power supply cable
Summary of Contents for K17
Page 1: ...User Manual K17...
