background image

- 20 -

THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU 

MAY ALSO HAVE OTHER RIGHTS, AS THEY VARY FROM STATE TO STATE.

THIS LIMITED WARRANTY CAN ALSO BE FOUND ON OUR WEBSITE AT 

WWW.XTRONICUSA.COM/SUPPORT/WARRANTY.

WE WARRANT THAT DURING THE WARRANTY PERIOD, THE PRODUCT 

WILL BE FREE FROM DEFECTS IN MATERIALS AND WORKMANSHIP.

WE LIMIT THE DURATION AND REMEDIES OF ALL IMPLIED 

WARRANTIES, INCLUDING WITHOUT LIMITATION THE WARRANTIES OF 

MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE TO THE 

DURATION OF THIS EXPRESS LIMITED WARRANTY.

SOME STATES HAVE DIFFERENT LIMITATIONS ON HOW LONG AN 

IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY 

TO YOU. 

OUR RESPONSIBILITY FOR DEFECTIVE GOODS IS LIMITED TO REPAIR, 

REPLACEMENT OR REFUND AS DESCRIBED BELOW IN THIS WARRANTY 

STATEMENT.

WHO MAY USE THIS WARRANTY?

X-Tronic International Inc. located at 2159 Magnum Circle, Lincoln, Nebraska 

68522 (“we”) extend this limited warranty only to the consumer who originally 

purchased the product in the United States, the District of Columbia or Canada 

(“you”). It does not extend to (a) any subsequent owner or other transferee of 

the product, (b) any product shipped outside of the United States, the District of 

Columbia or Canada, or (c) anyone who may have purchased it from someone 

other than X-Tronic International Inc.. Proof of purchase is required for in-

warranty service. We recommend you promptly register this product on our 

website (www.XTronicUSA.com) to facilitate verification of the date of the original 

purchase. Keep the product manual and your sales receipt together for future 

reference.

WHAT DOES THIS WARRANTY COVER?

This limited warranty covers defects in materials and workmanship of the product 

for the Warranty Period as defined below. In addition, during the Initial Warranty 

Period, this limited warranty also covers defects occurring in the initial shipment 

of the product to you. 

3-YEAR LIMITED

WARRANTY

Summary of Contents for 5040-XR3

























Reviews: