X-TREME XM-4000Li, Operation And Maintenance Instructions

Page: 14 / 20

Diagnostics Indicators
If your scooter fails to function properly, please check the diagnostic
indicators on the display panel.
Symptom:
Light 1 on
Diagnostics: Faulty brake switch, kickstand down or missing, or motor
overheating can cause light 1 to illuminate.
Solution: Please take the following steps:
Step 1. Apply the brake lever and release it . The scooter will go back to normal if
light 1 goes off. If light 1 remains on, please do step 2.
Step 2. Kick up the side stand. The scooter will go back to normal if light 1 goes
off. If light 1 remains on, please do step 3.
Step 3. Wait a few minutes until the motor cools off. The scooter will go back to
normal if light 1 goes off.
Symptom:
Light 2 on.
Diagnostics: Controller overheat protection
Solution: Wait a moment untill this light goes off automatically and the scooter
will go back to normal.
Symptom:
Light 3 flashes
Diagnostics: This only applies to lithium powered scooters. The flashing light
indicates low voltage.
Solution: Please reduce the speed to obtain extra running miles and recharge
the scooter immediately.