Page26
Troubleshooting: Scooter On, Not Running
Follow the wire from the left handbrake down under the foot plate. Unplug this wire. There is
a safety in that brake that will not allow the motor to run when the brake is being applied.
Make sure the rear wheel is off of the ground, then try turning the throttle with this
unplugged.
Troubleshooting: Scooter Will Not Shut Off
Place the scooter off the ground so the rear wheel will not touch the ground. You do not want
your scooter to take off. Take the footplate off. Disconnect the throttle clip under the
footplate, then turn the scooter on and see if it still runs. If it does, you will need a new
controller.
Troubleshooting: Scooter Won’t Run, Charger Stays Green
When you plug your charger into your scooter and the wall outlet the charger light stays
green. This is telling me that somewhere between charger socket, controller, fuse holder and
batteries you have an open circuit. Please remove the floor plate and check the wires in this
area. You may find a wire that is not connected, a connector that is not pushed together
properly or a fuse holder that is not letting the fuse connect properly.
Troubleshooting: Scooter Won’t Run, Charger Stays Red &
Green
When you plug your charger into your scooter and the wall outlet the charger light stays
green. This is telling me that somewhere between the batteries, fuse, and charger socket
you have an open circuit. Please remove the floor plate and check the wires in this area. You
may find a wire that is not connected, a connector that is not pushed together properly or a
fuse holder that is not letting the fuse connect properly.
