Page7
Assembly – Cont:
6. Check below the foot plate to ensure the
motor connector is plugged into the
controller. If not, connect the two ends
together as shown.
7. Attach the seat post to the seat post
receiver, then attach the clamp to the top of
the seat post. Pull the upper seat post to
the desired position and tighten the clamp
securely.
8. Attach the seat to the upper seat post and
tighten the seat bolts as shown.
9. FAILURE TO PROPERLY TIGHTEN AND
ALIGN THE SEAT COULD RESULT IN
RIDER INJURY. DO NOT ATTEMPT TO
RIDE
WIHTOUT
PROPER
SEAT
ADJUSTMENT AND ENSURING SEAT
BOLTS ARE SECURE & TIGHT!
