6. Suggestions and implementing rules
-
X-10
is a professional GSM/GPS vehicle tracking system working by external
-
power supply, and managing I/O wiring signals. Only professional and expert
-
personnel is allowed to install this device.
- In order to get the first GPS valid fix, it’s necessary to place the device in a
-
good place (better if in open sky) avoiding any metal surface obstructing it.
- This device is not water resistant, it comes with internal rechargeable battery
-
for backup power supply and it works in temperature environment from -20°
-
to 60°. It is strictly recommended to use it in appropriate environment
-
conditions.
- Please strictly follow implementing rules and suggestions reported into this
-
manual.
- In order to avoid any warranty restriction please don’t not modify and/or
-
dismount the device in any way.
- Use of this device is full responsibility of the user. It is necessary to use it
-
carefully and in full compliance with the local legislation and laws.
- X-TraX S.r.l. is not responsible for any damage or disservice due to
-
inappropriate installation or improper use of the device.
3. Specifications
- Size: 73 x 54 x 22mm. Weight: 80gr (battery included)
- Power source: DC 8-30V
- Operating temperature: from -20°C to 60°C
- Internal rechargeable backup battery: Li-Polymer 850mA/h (3,7V) - more
-
than 4h of autonomy in “operating mode”
- Power consumption: in “operating mode” (GPS, GSM/GPRS, RF and G-Sensor
-
ON – except backup battery charging) <30mA @ DC 12V; in “sleep mode”
-
(GPS, GSM/GPRS and RF OFF, G-Sensor ON) <3mA @ DC 12V
- GSM/GPRS and GPS status LED
- Quectel combined GPS/EGPRS/2G module (also available with EGPRS/4G LTE
-
– Cat M1/Cat NB2 modem)
- Embedded GSM antenna
- Embedded GPS antenna (external GPS antenna available as optional)
- Communication channels: SMS and GPRS/TCP
- Undelivered events buffer capability: up to 7000 logs
- Unit programming by USB, SMS or GPRS
- 5 VIP SMS numbers
- Voice wiretapping (only available with 2G modem)
- Mileage Counter (managed by GPS)
- Advanced real time Tracking setting
- Daily Timer report (up to 3 pre-defined Timers per day)
- Wake-up on movement & Entering sleep mode reports
- Advanced Power Saving Mode setting
- Tow and Speed limit reports (managed by GPS)
- Jamming function
- Driver ID management by remote control (up to 250)
- Driver ID management by wired keypad (up to 1500)
- Driver ID management by i-Button (up to 1500)
- Up to 5 physical Inputs: 2 Pos 3 settable to Positive or to Negative
- IG function for “Engine On” & “Engine Off” detection
- Up to 4 Analog Inputs (0~30V)
- 4 physical Outputs (Negatives 160mA)
- Up to 12 virtual Outputs (for configuration setting purpose only)
- Up to 100 advanced User-defined reports
- Up to 30 circular Geofences
- Auto-target function
- Up to 100 Time schedules
- Service mode (On/Off)
- 3D G-Sensor (adjustable sensitivity by remote)
- 433,92MHz RF module
- Extension I/O box (optional)
- BLE module (optional)
- 1 TTL 3V Serial port (‘K’) + 1 RS-485 Serial port (‘S’)
- Remote Firmware upgrade OTA (by FTP)
