02
03
Safety Information
IMPORTANT
1. DANGERS, WARNINGS, AND CAUTIONS ALERT YOU TO IMPORTANT
OPERATING INSTRUCTIONS OR TO POTENTIALLY HAZARDOUS SITUATIONS.
PAY SPECIAL ATTENTION TO THESE SITUATIONS.
2. THIS ALARM IS NOT INTENDED TO ALERT HEARING IMPAIRED INDIVIDUALS.
THE USE OF ALCOHOL OR DRUGS MAY ALSO IMPAIR ONE’S ABILITY TO
HEAR THE SMOKE ALARM.
3. FIRES IN CHIMNEYS, WALLS, ROOFS, DIFFERENT LEVELS OR BEHIND CLOSED
DOORS MIGHT NOT BE DETECTED.
4. THIS DEVICE DOES
NOT
DETECT FLAMES, HEAT, CARBON MONOXIDE OR
OTHER HAZARDOUS GASES.
WARNING
1. NEVER IGNORE ANY ALARM. FAILURE TO RESPOND CAN RESULT IN SERIOUS
INJURY OR DEATH.
2. THE SILENCE FEATURE IS ONLY FOR YOUR CONVENIENCE AND WILL NOT
CORRECT A PROBLEM. ALWAYS CHECK YOUR HOME FOR A POTENTIAL
PROBLEM AFTER ANY ALARM. FAILURE TO DO SO CAN RESULT IN INJURY
OR DEATH.
3. TEST THIS SMOKE ALARM ONCE A WEEK. IF THE ALARM EVER FAILS TO
TEST CORRECTLY, REPLACE IT IMMEDIATELY! IF THE ALARM CANNOT WORK
PROPERLY, IT WILL NOT ALERT YOU TO A PROBLEM.
How to Set up and Interconnect Wireless Alarms
All X-Sense Link
+
wireless interlinked alarms contain a built-in RF module that
enables you to wirelessly connect 2 or more interlinked alarms and create an
interlinked network. When one unit is triggered, all interconnected alarms
will sound. The X-Sense Link
+
series contain wireless interlinked smoke
alarms, wireless interlinked carbon monoxide alarms, and wireless interlinked
combination smoke and carbon monoxide alarms. This model is designed to
be wirelessly interlinked with other X-Sense Link
+
alarms, but is not designed
to communicate with wireless interlinked alarms from other manufacturers.
The X-Sense Link
+
wireless interlinked alarms in one multi-pack have
already been interconnected, and the alarms in each multi-pack have
their own independent interlinked network. If you have more than one
multi-pack, you will need to connect them all to the same network.
Choose one multi-pack as your base network and connect the other
multi-packs to it.
NOTE! The following instructions regarding wireless interconnection are
applicable to the X-Sense Link
+
wireless interlinked alarms only.
H ow to Interconnect
1. Make sure you only work with 2 units at a time, and make sure that they
are both turned on to ensure successful connection.
