R M 6 1 S P E C T R O P H O T O M E T E R
7
Packaging Content
Your instrument packaging should contain all the items listed
below. If any of these items are missing, contact your
Authorized Representative.
•
RM61 instrument with battery pack
•
Interface cable
•
Calibration standard
•
Switching power supply with line cord
•
Carrying pouch
•
Documentation and registration material
Installing/Removing the Battery Pack
The instrument is shipped from the factory with the battery
pack removed. The battery pack must be installed before the
instrument can be used.
1.
Hold the shoe next to the instrument housing and lift
upwards on the spring-loaded latch.
2.
Slowly allow the shoe to pivot toward the back of the
instrument and release the latch.
Refer to the illustration on the next page
3.
Open the shoe perpendicular to the instrument housing.
4.
Carefully rotate the instrument over and rest it on its top.
5.
Slide the battery pack into the compartment with the
battery connector facing down and to the back.
Lift Upwards
Shoe Latch
