EN
34
35
Troubleshooting
Diagnostic Software
Use the
i1
Diagnostics software if you believe your
i1
Pro 3 is not functioning properly.
If the status indicator turns solid red after calibration the
i1
Pro 3’s internal sensor
diagnostic has discovered a problem.
In this case please perform the following steps:
1. Download the i1Diagnostics software at www.xrite.com/i1diagnostics and install
the software on your computer.
2. Launch
i1
Diagnostics Software.
3. Perform a functionality check by following the instructions given from the
i1
Diagnostics Software.
4. If
i1
Diagnostics software reports an error store the test report and contact your
nearest X-Rite Support Center. As an alternative you can also take a look at our
online support resources
http://xrite.com/support/i1Profiler
to troubleshoot your
issue.
Summary of Contents for PANTONE i1 PRO 3 PLUS
Page 1: ......
