X-Rite DC240 - DocuColor 240 Color Laser, Operator'S Manual

Page: 12 / 52

D T P 3 2 H S D E N S I T O M E T E R
10
Service Information
The DTP32HS Densitometer is covered by a one-year limited warranty and should be
referred to an authorized service center for repairs within the warranty period.
X-Rite provides repair service to their customers. Because of the complexity of the circuitry,
all repairs should be referred to an authorized service center.
X-Rite will repair any instrument past warranty. The customer shall pay shipping and repair
cost to the authorized service center, and the instrument shall be submitted in the original
carton, as a complete unaltered unit along with all the supplied accessories.
General Maintenance
Your instrument requires very little maintenance to achieve years of reliable operation.
However, to protect your investment and maintain reading accuracy, a few simple-cleaning
procedures should be performed from time to time.
General Cleaning
Whenever required, the exterior of the instrument may be wiped clean with a cloth
dampened in water or mild cleaner.
NOTE: DO NOT use any solvents to the clean the instrument, this will cause damage to the cover.
Cleaning the Strip Reading Mechanism
The reading mechanism should be cleaned once a week in normal environments, and more
often in dirty or dusty environments.
1.
Disconnect the power supply from the instrument.
2. Turn instrument upside-down.
3. Using your index finger and thumb, pinch the two tabs on the bottom of the base
assembly towards each other.
4. Holding the tabs, lift base assembly upward.
5. Clean base surface, bottom plate surface, idler rollers, and drive wheels with a lint-free
cloth.
Base Tabs