8
Copyright© Vertical Leisure Ltd. 2019 Version 2.0
All rights reserved.
®
LEADERS IN POLE & AERIAL FITNESS
X-Joint
Key
U Keyway Slot
A-Pole
B-Pole
EXPAND
CONTRACT
Visible Gap
A-Pole
B-Pole
No Gap
X-Joint
Pole Tube
U Keyway Slot
Key
EXPAND
CONTRACT
EXPAND
CONTRACT
Assembling your X-Pole
At the centre of the X-Joint are 2 x Keys. These Keys slide into the corresponding U Keyway slots in the pole tube.
Fig. (5.1)
Fig. (5.2)
Fig. (5.3)
Insert a 200mm X-Joint (250mm X-Joint for 40mm
and Silicone poles) into the A-Pole ensuring the keys
locate into the U Slots and the expansion screws line
up with the holes on the pole tubes. Next attach the
B-Pole to the A-Pole with the X-Joint ensuring the
Keys engage with the U Keyway Slots.
Check the tube edges are tight together – then gently
tighten the screw in the A-Pole – now gently tighten
the other tube (B-Pole) – continue to progressively
tighten each, alternating between the two until no
further force can be applied to the screws.
Connecting the A-POLE (main tube with screws & screw adjuster at one end) to the B-POLE.
A Pole
Hex Key
B Pole
CLOCKWISE to TIGHTEN
Hex Key
Fig. (5.4)
Scan QR
for full
demonstration video
on the X-Joint
CAUTION: It is important to tighten the screws progressively – alternating between the screws,
tightening Clockwise. This will ensure the X-Joint pressure is equalised within the pole tubes.
Failure to do so can permanently damage your pole. Joints need tightening regularly and should
be checked each time before using the pole.
