X-METAL 37914, Assembly Instructions Manual

Page: 3 / 28

3
User’s manual
Please check local building codes regarding footings, location and other requirements before beginning construction.
ASSEMBLY INSTRUCTIONS:
Reviewing all instructions and the appropriate information before you begin, make sure following the step sequence carefully for
successful results.
FLOORING BASE:
A good location for the storage building is a square and level area with good drainage. The base is not included in the kit which
may need purchase separately or may construct a foundation and anchoring system of your own. The foundation base should
be 10 cm larger than the base rail of the shed (minimum 10cm thickness concrete slab is recommended). A strong plastic sheet
(thickness: at least 150μm) should be placed under the foundation to assist in reducing rising dampness from the soil, thus
reducing condensation build up in the shed. Your storage building must be anchored to prevent wind damage. Once secured, it is
highly recommended applying silicone along the inside of the base rail to minimize condensation
PARTS AND PARTS LIST:
Before you start, check to be sure that you have all the necessary parts for your building (refer to the Parts List Page). Do not
attempt to assemble the building if parts are missing because any building left partially assembled may be seriously damaged by
light winds. Please tear off the safety protection layer before assembly, keep the part number label if needed.
TOOLS YOU NEED: (SEE PICTURES):
SAFETY MUST BE PUT IN THE NO. 1 POSITION:
1. Select a dry and calm day for your assembly. Team works (Two or more people) are required during the assembly. It is also
recommended to finish the assembly in a day to avoid damage to the product or missing of some small parts. Keep all small
parts (screws etc.) in a bowl so they do not get lost.
2. Wearing safety gloves, eye protection and long sleeves during the assembly to prevent injury. Pay attention to the sharp edge
of some parts.
3. Children and pets are not allowed entering into the construction site.
4. Never concentrate your total weight on the roof of the building. When using a step ladder make sure that it is safe.
CARE & MAINTENANCE:
1. Keep the shed clean with soft cloth, use water if necessary.
2. Clean the snow with necessary tools to make sure it is safe to enter into.
GB

Please pay attention to safety
when using the instruments.