background image

Distributor

C101A500E

U

031417

11653 

台北市文山區萬和街

8

7

7th Floor, No. 8, Wanhe St., Wenshan District,

11653 Taipei City, Taiwan, R.O.C.

TEL:886-2-2230-1168    FAX:886-2-2239-2112

e-mail:[email protected] 

http://www.x-loupe.com   http://www.lumos.com.tw

Troubleshooting & Storage

(1) About the troubleshooting of camera, please refer to the Camera User Guide.
(2) The LED of lens barrel is not on:

 Check the battery power.

 Remove the lens and assemble it back to the module again.

     Make sure that the assembling of the lens and module is correct.

 

Check the brightness index of module lighting is not set to zero. If it is, set back to “entire bright” or the suitable brightness.

(3) Error code shown on camera display - the lens barrel of camera can not stretch out or retract:

 Turn off the camera, the lens should be automatically retracted, then remove the module, check the setting for shooting mode.

    

 

Note:

 If the shooting mode is set incorrectly, it will cause the camera lens over extend to touch the module,

              which may cause the damage to the camera lens.

 If the problem is not solved, contact your local distributor; never try to fix the camera lens by force.

(4) Out of Focus:

 Adjust the direction or posture while shooting.

 Press the shutter halfway and adjust the distance between the subject and lens to reach the best focus.

 X-Loupe

®

 is a contact-based digital microscope; therefore, do not take the picture out of its short working distance.

 Whether the camera setting has been varied? The changes in setting may lead to the function of micro photography is ineffectual.

(5)

 Keep product in the dry environment such as a dry box, and get some desiccants inside the storage case / box if necessary.

      

It is advised to use the optional “X-Loupe

®

 specialized carrying case”.

Attention / Warning for the Battery Charging

Please use the included charger to charge the battery.
(1) Charging Signal will light on. -- Red: Charging; Green: Charging complete.
(2) After full charge, remove the battery from charger. Do not leave a fully charged battery connected to a charger, since overcharging 

may shorten the battery life. Unplug the charger from the electrical plug when not in use.

(3) DO NOT use the battery charger in humid circumstances.
(4) Please recycle when possible. DO NOT dispose as household waste.

Safety Notice

(1) Before using this product, please make sure that you have read and understood the manual thoroughly.
(2) Keep this product away from chlidren.
(3) This product equipped high-brightness LEDS. The LED light can be intense enough to injure eyes.
      For eyes safety, DO NOT look directly into LED at close range; also DO NOT aim the light at people.

(4) DO NOT use any flammable reagent or liquid containing alcohol, benzene, or dilutant to clean X-Loupe

®

.

(5) Damages caused by any inadequate operation such as dropping, collision, or plummet are NOT covered in the warranty.
(6) DO NOT have X-Loupe

®

 closed to any tinder or throw it into the flame.

(7) DO NOT throw X-Loupe

®

 into any liquid. In case of any liquid droplet on the surface of X-Loupe

®

,

      please wipe it out immediately.

(8) Please DO NOT discard X-Loupe

®

 into the trash can.

Disclaimer

Thank you for using this product. While every effort has been made to ensure that the 

information contained in this guide is accurate and complete, no liability can be accepted 

for any errors or omissions.

We (Lumos Tech.) reserves the right to change the specifications described herein at 

anytime without prior notice.

No part of this guide may be reproduced, transmitted, transcribed, stored in a retrieval 

system, or translated into any language in any form, by any means, without the prior 

written permission of Lumos Technology Co., Ltd.

Trademark Acknowledgments

CASIO EX ZR65 are either registered trademarks or trademarks of CASIO in Taiwan and/or other 

countries.

X-Loupe

®

 is a registered trademark of Lumos Technology Co., Ltd. You are not authorized to use 

such trademark and service marks for any purpose unless you receive specific written permission 

from us (Lumos Tech.) We reserve the trademark or other intellectual property rights.

After Reading, Keep the User Guide Handy for Future Reference

In the interest of continually improving products, Lumos Tech. reserves the right to update or modify information contained in this manual without prior notice.

Product image of this manual is for reference only and actual product appearance may vary.

Reviews: