page 20
page 21
Settings Instruction
Adjusting the Brightness - Enter Exposure Compensation mode.press
the button; press the , set to ±0, then press the button.
(Camera User Guide Page.85)
Press the button ,choose , then press to turn the Flash off.
<Notice> It’s likely to turn the flash back on by careless touch!
Do Not start the Macro shot Mode.
Switching the Display-You can also switch the display by pressing
the button while the image displays right after shooting
Canon Digital Camera Basic Setup – Micro-Photography
Basic Skills for Micro-Photography
5. Distance:
In micro-photography, any tiny minor vibration (such as the pulse) can have some
influences on picture quality. To acquire maximum stability, the working distance
of X-Loupe® was designed to approach the subject, the conventional microscopy.
Sometimes, moving X-Loupe®up and down a little bit can reach the best focus. The
AF (autofocus) green frame(s) on the LCD means good focus, whereas orange means
close to the focus but not good enough.
6. Movie:
Due to the large size of a movies file, please use 512MB SD card or above to avoid
losing the important scene. The 1.6X and 2.0X of Digital Tele-Converter are not
available for the movie function. page46
Working Distance
Depth of Focus
60x
4~4.43cm
1.8mm
150x
1.1~1.3cm
0.8mm
300x
0.8cm
0.25mm
The Setting based on Canon PowerShot ELPH 100 HS/IXY
Digital 210 F is for reference and revision, and other
type as well
(1) Move the zoom lever toward , the sign of 4X for
its maximum optical value should show up on LCD
monitor.
(2) Set the mode switch to . After pressing the
button, press the buttons to choose P; then
press to set the P Mode as the Manual Mode
(Refer to Camera User Guide p.64)
Exposure Compensation
Macro
Display
Flash
Summary of Contents for G-series
Page 1: ...English Digital Portable Microscope User s Guide...
Page 16: ......
Page 17: ...page 30 page 31 MEMO MEMO...
