Operation m
anual X-TRIANGL
E
www.x-dreamfly.ch
Quality assurance
The X-dream Fly rescue devices go through a step by step control during the whole production. After every step,
the product is accurately checked and only after a successful pass of the test the following step will be started.
The fab- ric, the straps, lines and also the sewing machines are verified before use. Continuous quality controls of
the produc- tion process ensure an error-free production. Each rescue unit is subjected to a strict final inspection
before it leaves our factory.
Materials used
The materials used were selected very carefully and under the strictest quality standards. So we choose a rip-stop
20-dtex 6.6 nylon fabric from Delcotex. This meets the required strengths, convinced by good workmanship and
promises a longer life. The main seams are including a webbing which enhance the strength of the canopy. The
lines are made out of high-strength Dyneema for an enormous weight reduction. The middle lines are made of
polyester. The connection of the lines to the canopy are also made out of dyneema|polyester and corresponds to
the international parachute workmanship
The components
The X-TRIANGLE consists of 4 components:
• the canopy (triangle-canopy)
• the suspension lines (side and middle line)
• main riser incl. loop in riser
• inner container
Certification
The rescue device X-TRIANGLE by X-dream Fly are approved by the German airworthiness requirement LTF and
EN-12491:2001. The approval is valid only in use with the original X-dream Fly 4-leaf inner container. When using
a X-TRIANGLE in the context of a non-original inner container please note the corresponding release in the
appendix of this manual.
Operational limits
X-TRIANGLE Certification LTF = 150 km|h = 41,6m|s.
According to EN 12491 rescue equipment is not suitable for use at speeds greater than 32 m|s or 115 km|h.
Every 12 months the X-TRIANGLE rescue equipment need to be repacked. It makes sense when you throw the
rescue package for training on this occasion in a clean, dry space. Currently, there is no verification requirement
for rescue equipment. However, we recommend every 24 months a review of the rescue system. After each case
of a real
emergency opening the X-TRIANGLE rescue device should be checked by the manufacturer.
Permissible operating time: 12 years in compliance with the pack intervals and storage regulations. An extension
up to 15 years is possible after an inspection of the manufacturer.
page 8 of 39
