4 MONITOR AND CONTROL INTERFACE
In addition to the Receiver Web Interface and the Affiliate Website, the PRO1 Receiver
is equipped with an M&C console port on the back of the receiver. This port can be used
to access the command line interface of the receiver. In addition to the M&C port on the
back of the receiver, the console can be reached via a telnet terminal on port 2000. All
console commands are the same through the rear port or through a telnet terminal.
4.1
Setting up a Console Connection
To set up a console interface from your computer to the receiver:
x
Connect a standard serial cable from the serial port on your computer to the port
labeled “Console” on the back of the receiver.
x
Open HyperTerminal from the Start Menu: Start > All Programs > Accessories >
Communication > HyperTerminal.
x
In the Connection Description dialog, enter “
XDS
” as the connection Name, and
select a connection Logo. Press “OK”.
Figure 1 Connection Description
x
In the ‘Connect To’ dialog, select “COM1” in t
he Connect using drop down list.
