Revision J 9/30/2014 R830000-1060
Quick Start Guide, XDSPRO Receiver
Page 8 of 11
schedule the programs to appear on each output port. You will need to review your
schedule and activate your receiver with your stations programming.
Initially your receiver only outputs the
Test Channel
on all ports, the front panel LCD
shows a “
Please Activate
” message and the
orange UPDATE
LED in flashing.
You must edit and activate the schedule of the programs that you want to appear on
each audio output port of the XDS receiver through the WESTWOOD ONE Affiliate
website at
http://myxdsreceiver.cmneng.com
To login you will use the XDS receiver’s serial number as the username and a password
generated by the receiver. To find this password:
o
At the main screen with the Cumulus Media Networks logo, press the SET
key, then the left or right arrows to reach
Setup
. Press SET.
o
Press the left or right arrows to select
Serial Number
.
o
Press the
PWD
softkey to display your password.
Once logged in, you may setup a friendly password to the site and also review and
approve your receiver’s setup (Time Zone, Schedule, Relay Mappings, etc).
Adjust Time Zone
Setup the appropriate time zone for your receiver
Review Schedule
You will see the default schedule for every station your receiver supports. Please modify
and verify your schedule as desired.
RULE:
Each call-letter radio station at your site that carries any Westwood One
programming or commercials from this XDS receiver must be assigned to an XDS
receiver port and each port must be scheduled to output the programs you need.
NOTE:
Your new XDS receiver contains about 32 hours of audio storage which you may
use to “tape delay” network programs and schedule them to play later. You can
schedule the same XDS receiver port to “play back” a mixed schedule of live and
delayed programs.
