Revision J 9/30/2014 R830000-1060
Quick Start Guide, XDSPRO Receiver
Page 5 of 11
Your receiver should be pre-configured to output the
Test Channel
on all ports.
Verify you can hear the test program through all receiver ports.
To manually program the XDS receiver to output the
Test Channel
on a desired audio
port:
o
At the main screen with the Cumulus Media Networks logo, press the SET
key, then the left or right arrows to reach
Audio Ports
. Press SET.
o
Press the left or right arrows to select the
Audio Port
(letter A, B, C or D).
Press SET.
o
Press the left or right arrows to select
Program
. Press SET.
o
Use the up and down arrows to find
Test Channel.
Press SET.
1.3 INTERNET CONNECTION
This new XDS receiver requires connection to an always-on internet pathway. The
internet pathway is used by Westwood One to troubleshoot remotely, send audio or
text content to your receiver’s storage, send commercial playback schedules, retrieve
as-played logs of commercials inserted by the receiver, and more.
Your XDS receiver is delivered with a 20-foot Category 5 data patch cord wired “straight
through” (not crossover) for connection to your networks hub or switch.
A.
Connect the XDS Receiver to your network
If you elect to place your XDS receiver in your local network “inside” your
firewall, connect your network cable to one of the receiver’s
LAN
ports. The
receiver is set by default to obtain a dynamic IP address, also called a “DHCP
address”, from your network’s DHCP server. If there is no DHCP server or you
elect to assign a static IP address, you can do it as follows:
Assigning a Static IP address to a LAN Port:
o
At the main screen with the Cumulus Media Networks logo, press the SET
key, then the left or right arrow keys to reach
Setup
. Press SET.
o
Press the left or right arrow keys to reach
Network
. Press SET.
o
The default settings for DHCP is ON. Use the SET and arrow keys to change
DHCP from ON to OFF.
o
Press the left or right arrow keys to go to the LAN Address menu. Press SET.
o
Use the up and down arrow keys and the SET key to set the desired IP
address.
o
Press the left or right arrow keys to go to the LAN Subnet menu. Press SET.
o
Use the up and down arrow keys and the SET key to set the desired subnet
address.
o
Press the left and right arrows to go to the Gateway menu and press SET.
o
Use the up and down arrow keys and the SET key to set the desired gateway
address.
