X-Cite Exacte, User Manual

Page: 24 / 58

20
X-Cite
®
exacte User Guide
035-00283 rev 3
6.4 LED Indicators
6.5 Display Format Reference
6.5.1 The formatting used on the display board is used to identify the unit of
measurement (%, watts, Hours) of the value.
Display Format Definition Description
XXX Intensity Setting (%)
Displays the iris setting, which gives relative
intensity as percentage of
the lamp’s maximum
output
XX.XX Power Setting (watts)
Displays the power setting, which gives absolute
intensity in terms of watts
uXXX Power Setting (microwatts)
Displays the power setting, which gives absolute
intensity in terms of microwatts
X.XXX
or
XXX.X
Power Setting (milliwatts)
Displays the power setting, which gives absolute
intensity in terms of milliwatts
XXXX.
Lamp Hours
Displays the “hours of use” accumulated by the
lamp
Flashing:
“
XXXX
”
Warming Up
The lamp is warming up. Warm up time is
approximately 4 minutes
LED Indicator Status Description
LIGHT GUIDE
On
– Green
The light guide is fully inserted
On
– Red
The light guide is not fully inserted
LAMP
On The lamp is on
Off The lamp is off
OPEN
On The shutter is open
Off The shutter is closed
COARSE On
The unit is in coarse adjustment mode; LED
display indicates current intensity setting
FINE On
The unit is in fine adjustment mode; LED display
indicates current intensity setting
HOURS On
The unit is in lamp hours mode; LED display
indicates accumulated lamp hours
CAL
On
The X-Cite
®
exacte has been successfully
calibrated with Radiometer or Power Meter
Off The X-Cite
®
exacte is not calibrated
Blinking Calibration will expire within 12 hours
Closed-Loop
Feedback
On Closed-Loop Feedback is engaged
Off Closed-Loop Feedback is not engaged