14
X-Cite
®
exacte
User Guide
035-00283 rev 3
Figure 6 Light Guide Position
Tip:
When the light guide is fully inserted, the line on the light guide insertion
label will be right up against the light guide port. Also, the LED above the
light guide port will illuminate green when POWER is on to the unit. If the
light guide is not fully inserted the LED will illuminate red.
Note:
The shutter will not open if the light guide is not fully inserted.
5.2.5 To remove the light guide, firmly grip the strain relief near the light guide retainer
and pull out firmly.
Note
: The X-Cite
®
exacte is designed for use with a 3mm liquid light guide.
Excelitas Technologies
can not guarantee the performance of the X-Cite
®
exacte if using light guides other than those supplied by Excelitas
Technologies.
Note
: The light guide has a minimum bend radius of 1.6 inches (40.0mm).
Bending or coiling the light guide tighter than this radius will result in
permanent damage to the light guide.
LIGHT GUIDE
INSERTION LINE
LIGHT GUIDE
INSERTION LINE
RED LIGHT GUIDE
STATUS LED
GREEN LIGHT GUIDE
STATUS LED
Summary of Contents for Exacte
Page 1: ...X Cite exacte User Guide...
