46
6.3 Delete
When the last music track stored in hard drive is not the one
you wish to keep, switch to “delete” function and press GO
switch to delete it. You may always use this function to
delete the last track stored in the current partition of hard
drive.
6.4 Clear
This function clears the master data stored in the current
partition of hard drive. When you want to EDIT a new
collection of songs, you must run this function first to clear
the current partition of hard drive. Perform this function by
pressing GO switch at “Clear” function and LCD will show:
“Master cleared”.
6.5 Disc
Info
By using this function, users can get information from the
media discs that loaded in the writers, such as max. write
speed, capacity, etc.
6.6 Show
Drive
This setting shows the devices connected to the duplicator
such as CD/ DVD-ROM, CD/DVD writers and hard drive,
etc. It also displays the devices’ firmware version that
sometimes provides a useful hint for trouble shooting or for
future upgrade. It is suggested to use writers with SAME
firmware version to avoid inconsistency. The display is as
below:
Summary of Contents for CD-398
Page 50: ...50 7 Circuit drawing DVD 688 Controller Card LCD CONTROL HDD DVD ROM POWER ...
Page 51: ...51 DVD 668 Controller Card LCD CONTROL HDD CD DVD ROM POWER ...
Page 52: ...52 CD 398 DVD 399 Controller card LCD CONTROL COM2 COM1 CD DVD ROM HDD POWER ...
Page 53: ...53 DVD 319 Controller Card LCD CONTROL CD DVD ROM HDD WRITER POWER ...
