WYTRON CD-398, Operation Manual

Page: 30 / 58

30
autoloader, you will also need an extra COM port module
from Wytron to communicate between controller card and
autoloader. If no autoloader is connected actually but set
this option by mistake to one of the types for autoloader,
during new power booting, the controller card will hang in
“check loader…” message which is intending to search and
communicate with the autoloader. Please change back the
setting of this function to “No” option when the hang is
finished (might take quite a long time) or simply “reset” the
machine once to bring back the factory’s default setting on
controller card.
Press MODE to change the setting and GO to exit.
6.1.7 Eject Disc
This setting controls the ejection of discs by writer. Three
options are available: “Always” means the writers will
always eject the discs no matter whether operation is
successful or failed. “No” means all discs will remain in
writers when job is done and you will have to eject discs
from the writers manually. “Pass” setting will only eject the
passed discs automatically and leave the failed ones in the
writers. Press MODE button will eject those failed discs.
Press MODE to change the setting and GO to exit.
6.1.8 Buzzer
This setting controls ON and OFF of buzzer. Default setting
is “On”. Press MODE switch to change and GO to exit.