KYTRON TECHNOLOGY CORPORATION
Camera, Videos and digital Marketing
TEL. 1-416-855-2781
www.wysLink.com
3) At last, unplug the power adaptor, unplug LAN cable from camera, wait for more than 20 seconds, plug the
power adaptor again.
Method 2 Use smart Wi-Fi setting
Do not connect camera with LAN cable. It only works when the camera does have set any Wi-Fi networks.
1. Run the IPCAM P App. Click
on the home screen, then
click on “Add manually”. Click on “Next” from the
first
option “Smart Wi-Fi configure”.
2. The app automatically ask wi-Fi password of the Wi-Fi network that the phone connect to, power on the camera,
and camera sound continually, then select
“Advanced” on the app to start settings. It takes about one minutes.
Once Wi-Fi setting succeed, the sound will stop, and app list all the cameras on the network as pic (2-3) . if sound
continue, even after show pic(2-3), it means it fails. In this case, please try to use method 1.
3. (Same as method 1)
4. (Same as method 1)
5. (Same as method 1)
Advanced Settings
As picture 3-1, tap
to get function list bar and tap
navigating into advanced
settings, you can change password, set up motion detection, recording etc.
Operation and Setting for Video
You can change such settings on the video preview interface.
