5
Technical Support: [email protected] US: +1 866 677 0053 EU: +44 (0) 1793 230 343
WEB INTERF
ACE
8. Accessing the NHD-IP-CTL Web Interface
Follow steps below to access the web interface of the NHD-IP-CTL.
Enter
192.168.11.243
into a web browser. For optimal performance, we recommend use of the latest versions of
Firefox, Opera, Safari, Internet Explorer 11 or Chrome.
Attention
The default IP address of the NHD-IP-CTL is 192.168.11.243. To connect you must have a
network configured that allows this subnet or must set your PC to a 192.168.11.xxx address to connect. The
IP address of the IP Control Box can be changed through the System Settings page.
Ensure all NetworkHD components are connected to the network and powered up correctly.
Attention
If you receive a ‘server unavailable’ system message after entering this address into your
browser, ensure your PC is on the same subnet as the CTL box by following these steps:
Click
Start
menu, go to
Control Panel >
Network and Sharing center >
Change Adapter Settings >
Local Area Connection.
Right click and choose
Properties.
1
1
2
Check
Use the following IP
address
, for the
IP address
enter
192.168.11.x
(if unsure
use
192.168.11.5
) Enter
subnet
mask
number
255.255.0.0
Click
OK
, then click
OK
again.
Highlight
Internet Protocol
Version 4 (TCP/IPv4)
then
click
Properties
3
Return to your browser and try entering the default IP again (192.168.11.243)
4
2
Enter a
password (“admin”
by default) and
click Login to
access the device.
