3
Technical Support: [email protected] US: +1 866 677 0053 EU: +44 (0) 1793 230 343
PACKAGE CONTENTS, SPECIFICA
TIONS, P
ANEL DISPLA
Y
3. To prevent the risk of electric shock or fire hazard
due to overheating, do not cover the unit or
obstruct ventilation openings with material,
newspaper, cardboard or anything that may restrict
airflow into the unit.
4. Do not install near external heat sources such as
radiators, heat registers, boilers or any device that
produces heat such as amplifiers or computers and
do not place near sources of naked flame.
5. Unplug apparatus from power supply during
lightening storms or when unused for long periods
of time.
6. Protect the power cable from being walked on,
pinched or restricted in any way, especially at plug
connections.
7. Only use attachments/accessories specified by the
manufacturer.
8. Units contain non-servicable parts - Refer all
servicing to qualified service personnel
• 1 x NHD-IP-CTL
• 1 x 5V/2A Power Supply
• 1 x Serial Port Cable
• 5 x Label
4. Package Contents
5. Specifications
I/O Connections
1 x RJ45 Port
1 x RS232 - (service)
LED
LED indication for Power and Activity
Button
1 x Reset Button
Power Supply
5V/2A DC, 5.5mm
Power Consumption
1.4 Watts
Control Method
Web
Telnet
Third Party control system - including
WyreStorm Enado
System
Requirements
Industry Standard Cat5e/6 Cables
Supported TX/RX
NHD-IP-TX & NHD-IP-RX
Operating
Temperature
32°F to 95°F (0°C to 35°C)
10% to 90%, non-condensing
Storage
Temperature
-4°F to 140°F (-20°C to 70°C)
10% to 90%, non-condensing
ESD Protection
±8kV (air-gap discharge)
±4kV (contact discharge)
Surge Protection
Voltage: ±1000 V
(Tested ten times respectively for posi-
tive/negative voltages)
Dimensions
(HxWxD)
26mm x 141mm × 115mm / 1” x 5.6’’
× 4.5’’
Weight
0.42kg / 0.92lbs (without accessories)
Certification
RoHS, WEE, CE, FCC
6i. Panel Display - Front
6ii. Panel Display - Rear
1
4
2
3
Power - Lit red when device is powered on.
Active - Lit blue when device is functioning correctly
- lit red when device is rebooting.
Reset - Restore to factory default settings by
pressing and holding button for 5 seconds
when device is turned on.
IP Address Label - Insert label here to display IP
address of device
1
2
3
Ethernet - RJ45 Port
Service - RS232 Debug Only
Power - 5V / 2A DC power supply unit
1 2
3
4
1
2
3
